Details

---

BUY 23-0002-PTR6 https://www.utsource.net/itm/p/12536006.html

Parameter	Description
Part Number	23-0002-PTR6
Type	Phototransistor
Package	TO-46
Collector-Emitter Voltage (Vce)	30 V
Emitter-Base Voltage (Veb)	5 V
Collector Current (Ic)	50 mA
Power Dissipation (Ptot)	100 mW
Peak Wavelength	940 nm
Sensitivity	0.15 - 0.5 mA/lm
Rise Time	1 渭s
Fall Time	1 渭s
Operating Temperature Range	-40掳C to +85掳C
Storage Temperature Range	-40掳C to +100掳C

Instructions

1. Handling and Storage:

   • Store the phototransistor in a dry, cool place to avoid moisture damage.
   • Handle with care to prevent physical damage to the leads and body.

2. Mounting:

   • Ensure that the leads are bent carefully to avoid excessive stress on the component.
   • Soldering temperature should not exceed 260掳C for more than 10 seconds.
   • Allow the component to cool naturally after soldering.

3. Electrical Connections:

   • Connect the collector (C) to the positive supply or load.
   • Connect the emitter (E) to ground or the other end of the load.
   • The base (B) is typically left unconnected unless used in specific applications.

4. Operation:

   • The phototransistor will conduct current when exposed to light within its sensitivity range.
   • Use a suitable resistor in series with the load to limit the current and protect the phototransistor.

5. Testing:

   • To test the phototransistor, apply a known light source and measure the collector current.
   • Ensure the ambient light conditions are controlled to avoid false readings.

6. Safety:

   • Do not exceed the maximum ratings specified in the table to avoid damage to the component.
   • Use appropriate safety equipment when handling and testing the phototransistor.

(For reference only)