Details

---

BUY MC96F8208SMBN https://www.utsource.net/itm/p/12536023.html

Parameter	Description	Min	Typ	Max	Unit
Supply Voltage (Vcc)	Operating voltage range	2.0	-	5.5	V
Operating Temperature	Temperature range for operation	-40	-	85	掳C
Storage Temperature	Temperature range for storage	-65	-	150	掳C
Maximum Current	Maximum current consumption	-	20	-	mA
Input Voltage Range	Range of input voltages for digital inputs	0	-	Vcc	V
Output Current per Pin	Maximum current output per I/O pin	-	10	-	mA
Total Output Current	Maximum total current output from all I/O pins	-	50	-	mA
Clock Frequency	Maximum clock frequency	-	8	-	MHz
Flash Memory Size	Size of non-volatile flash memory	-	8	-	KB
RAM Size	Size of volatile RAM memory	-	512	-	B
Watchdog Timer	Timeout period for watchdog timer	0.5	-	64	ms
Low Power Mode	Power consumption in low power mode	-	1	-	渭A

Instructions for Use:

1. Power Supply:

   • Ensure the supply voltage (Vcc) is within the range of 2.0V to 5.5V.
   • Connect the ground (GND) pin to a stable ground reference.

2. Temperature Considerations:

   • Operate the device within the temperature range of -40掳C to 85掳C.
   • Store the device within the temperature range of -65掳C to 150掳C.

3. Current Consumption:

   • The maximum current consumption is 20mA. Ensure the power supply can provide this current.
   • Each I/O pin can source or sink up to 10mA, with a total of 50mA for all I/O pins combined.

4. Input and Output:

   • Digital inputs should be within the range of 0V to Vcc.
   • Ensure that the total current drawn from the I/O pins does not exceed 50mA.

5. Clock Configuration:

   • The maximum clock frequency is 8MHz. Use an appropriate crystal or oscillator to achieve the desired clock speed.

6. Memory Usage:

   • The device has 8KB of flash memory for program storage and 512B of RAM for data storage.
   • Optimize your code and data usage to fit within these limits.

7. Watchdog Timer:

   • Configure the watchdog timer with a timeout period between 0.5ms and 64ms to prevent system lockups.

8. Low Power Mode:

   • To reduce power consumption, enter low power mode where the device consumes approximately 1渭A.

9. Programming and Debugging:

   • Use a compatible programmer to upload code to the flash memory.
   • Utilize debugging tools to monitor and control the device during development.

10. Handling and Storage:

    • Handle the device with care to avoid static discharge.
    • Store the device in a dry, cool place to prevent damage.

For detailed programming and application notes, refer to the datasheet and application notes provided by the manufacturer.

(For reference only)