Details

---

BUY S2EB-5V https://www.utsource.net/itm/p/12536057.html

Parameter	Symbol	Min	Typ	Max	Unit	Description
Input Voltage	VIN	6	-	40	V	Operating input voltage range
Output Voltage	VOUT	5	-	-	V	Fixed output voltage
Output Current	IOUT	-	-	1	A	Maximum continuous output current
Efficiency	η	-	85	-	%	Typical efficiency at nominal load
Quiescent Current	IQ	-	2	-	mA	Quiescent current
Line Regulation	ΔVOUT/ΔVIN	-	-	0.01	%/V	Change in output voltage per input voltage change
Load Regulation	ΔVOUT/ΔIOUT	-	-	0.05	%/A	Change in output voltage per output current change
Ripple and Noise	VRMS	-	-	50	mV	Output ripple and noise
Operating Temperature	TOPR	-40	-	85	°C	Operating temperature range
Storage Temperature	TSTG	-55	-	125	°C	Storage temperature range

Instructions for Use:

1. Input Connection:

   • Connect the input voltage (VIN) to the positive terminal of the S2EB-5V.
   • Ensure the input voltage is within the specified range (6V to 40V).

2. Output Connection:

   • Connect the output voltage (VOUT) to the load or circuit requiring 5V.
   • The maximum output current should not exceed 1A.

3. Ground Connection:

   • Connect the ground (GND) of the input and output to ensure proper operation and safety.

4. Thermal Management:

   • Ensure adequate heat dissipation if operating at high output currents or in high ambient temperatures.
   • Use a heatsink if necessary to keep the device within the operating temperature range (-40°C to 85°C).

5. Efficiency Considerations:

   • The typical efficiency is 85%, which means some power will be lost as heat. Design the system to handle this heat dissipation.

6. Ripple and Noise:

   • The output ripple and noise are typically less than 50mV. If lower ripple is required, consider adding additional filtering capacitors at the output.

7. Storage and Handling:

   • Store the device in a dry, cool place within the storage temperature range (-55°C to 125°C).
   • Handle with care to avoid physical damage or electrostatic discharge (ESD).

8. Testing:

   • Before connecting the S2EB-5V to your final application, test it with a known load to ensure it meets the required specifications.

9. Compliance:

   • Ensure that the use of the S2EB-5V complies with all relevant safety and regulatory standards for your specific application.

(For reference only)