Details

---

BUY AM29LV040B-60REI https://www.utsource.net/itm/p/12536101.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	Vcc	Operating	2.7	-	3.6	V
Standby Current	ICC	Vcc = 3.0V, T = 25°C	-	1	-	μA
Active Current	ICC	Vcc = 3.0V, T = 25°C	-	10	-	mA
Programming Current	Iprog	Vpp = 12.0V, T = 25°C	-	25	-	mA
Write/Erase Time	tPROG	Vcc = 3.0V, T = 25°C	-	5	-	ms
Block Erase Time	tBE	Vcc = 3.0V, T = 25°C	-	200	-	ms
Chip Enable Setup Time	tCES	VIH, VIL	-	0	20	ns
Chip Enable Hold Time	tCEH	VIH, VIL	-	0	20	ns
Output Enable Setup Time	tOES	VIH, VIL	-	0	20	ns
Output Enable Hold Time	tOEH	VIH, VIL	-	0	20	ns
Read Cycle Time	tRC	Vcc = 3.0V, T = 25°C	-	70	-	ns
Access Time	tAA	Vcc = 3.0V, T = 25°C	-	60	-	ns

Instructions for Use:

1. Power Supply:

   • Ensure the supply voltage (Vcc) is within the range of 2.7V to 3.6V.
   • The device can operate at a typical standby current of 1μA and active current of 10mA.

2. Programming:

   • The programming current (Iprog) should not exceed 25mA.
   • The typical write/erase time (tPROG) is 5ms.

3. Erase Operations:

   • The block erase time (tBE) is typically 200ms.

4. Timing Parameters:

   • Ensure that all setup and hold times (tCES, tCEH, tOES, tOEH) are met to avoid data corruption.
   • The read cycle time (tRC) is 70ns, and the access time (tAA) is 60ns.

5. Environmental Conditions:

   • The device is designed to operate at a typical ambient temperature of 25°C, but it can handle a wider range as specified in the datasheet.

6. Handling and Storage:

   • Handle the device with care to avoid static damage.
   • Store in a dry environment to prevent moisture damage.

7. Pin Configuration:

   • Refer to the datasheet for the specific pin configuration and functions.

8. Programming and Erasing:

   • Follow the programming and erasing sequences detailed in the datasheet to ensure reliable operation.

9. Testing:

   • Perform initial testing under controlled conditions to verify functionality before deploying in a final application.

(For reference only)