Details

---

BUY PALCE22V10H-15PC https://www.utsource.net/itm/p/12536108.html

Parameter	Description	Value
Package Type	Package style	PLCC-20
Operating Voltage (Vcc)	Supply voltage range	4.5 V to 5.5 V
I/O Voltage (Vih/Vil)	Input high/low voltage levels	Vih: 3.5 V / Vil: 1.5 V
Output Current (Ioh/Iol)	Output high/low current	Ioh: -4 mA / Iol: 16 mA
Propagation Delay (tpd)	Maximum propagation delay time	8 ns
Power Consumption	Maximum power consumption	100 mW
Operating Temperature	Operating temperature range	-40°C to +85°C
Storage Temperature	Storage temperature range	-65°C to +150°C
Programmable Cells	Number of programmable cells	22
Logic Gates	Equivalent number of logic gates	10
Programming Voltage	Programming voltage required for configuration	12.5 V
Erase Voltage	Erase voltage required for configuration	12.5 V
Programming Time	Typical programming time	5 ms
Erase Time	Typical erase time	5 ms
Endurance	Number of program/erase cycles	100,000
Data Retention	Data retention at maximum operating temperature	10 years

Instructions for Use

1. Power Supply:

   • Ensure the supply voltage (Vcc) is within the specified range of 4.5 V to 5.5 V.
   • Connect the Vcc pin to the positive supply and GND pin to the ground.

2. Input Signals:

   • Input signals should be within the valid input voltage levels (Vih: 3.5 V, Vil: 1.5 V).
   • Ensure that input signals are stable and within the specified range to avoid undefined behavior.

3. Output Signals:

   • The device can source up to 4 mA and sink up to 16 mA per output pin.
   • Ensure that the load connected to the output pins does not exceed these current limits.

4. Programming:

   • Use a compatible programmer to configure the device.
   • Apply the programming voltage (12.5 V) to the appropriate pins during the programming process.
   • Follow the programming sequence provided by the manufacturer to ensure successful configuration.

5. Erase:

   • To erase the device, apply the erase voltage (12.5 V) to the appropriate pins.
   • Follow the erase sequence provided by the manufacturer to ensure complete erasure.

6. Temperature Considerations:

   • Operate the device within the specified temperature range (-40°C to +85°C) to ensure reliable performance.
   • Store the device in a temperature-controlled environment within the storage temperature range (-65°C to +150°C).

7. Handling:

   • Handle the device with care to avoid damage from electrostatic discharge (ESD).
   • Use proper ESD protection measures when handling and soldering the device.

8. Mounting:

   • Ensure proper alignment and soldering of the device to the PCB.
   • Follow the recommended soldering profile and reflow temperature settings provided by the manufacturer.

9. Testing:

   • After programming and mounting, test the device to ensure it meets the specified performance parameters.
   • Use a functional test setup to verify the correct operation of the device.

For detailed specifications and additional information, refer to the datasheet provided by the manufacturer.

(For reference only)