Details

---

BUY CA3140T https://www.utsource.net/itm/p/12536111.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	Vcc	Operating	3		30	V
Input Offset Voltage	Vos	Ta = +25掳C		2	10	mV
Input Bias Current	Ib	Ta = +25掳C		50	150	pA
Input Offset Current	Ios	Ta = +25掳C		5	15	pA
Differential Input Voltage	Vid		卤14			V
Output Short-Circuit		Continuous
Slew Rate	SR			0.3		V/渭s
Unity Gain Bandwidth	GBP			1		MHz
Large Signal Voltage Gain	Avo	RL=10k惟	100			dB
Quiescent Current	IQ	All outputs idle		80	400	渭A
Operating Temperature	Temp		-40		85	掳C

Instructions for CA3140T:

1. Power Supply Connection:

   • Connect the supply voltage (Vcc) to pin 8 and ground (GND) to pin 4. Ensure the supply voltage is within the specified range of 3V to 30V.

2. Input Connections:

   • Connect the non-inverting input (pin 3) and inverting input (pin 2) according to your circuit design. Be mindful of the differential input voltage limit of 卤14V.

3. Output Configuration:

   • The output (pin 6) can be connected directly to a load or through additional components as needed. Ensure the output does not remain short-circuited continuously.

4. Biasing and Compensation:

   • For stable operation, external compensation may be required depending on the application. Refer to specific application notes for detailed guidance.

5. Temperature Considerations:

   • Ensure the device operates within the temperature range of -40掳C to +85掳C to avoid performance degradation or damage.

6. Handling Precautions:

   • Handle the CA3140T with care to avoid static damage. Use proper ESD protection measures during assembly and handling.

7. Testing:

   • After installation, test the circuit under typical operating conditions to ensure it meets the expected performance parameters. Adjust input signals and feedback networks as necessary.

(For reference only)