Details

---

BUY SG3525AN https://www.utsource.net/itm/p/12536138.html

Parameter	Description	Min	Typical	Max	Unit
Supply Voltage (Vcc)	Operating supply voltage range	8	-	40	V
Quiescent Current	Total quiescent current at Vcc = 15V	-	15	-	mA
Output Voltage (High)	Output high-level voltage at Vcc = 15V, Iout = 10mA	13.5	-	15	V
Output Voltage (Low)	Output low-level voltage at Vcc = 15V, Iout = 10mA	0	-	0.5	V
Frequency Range	Adjustable frequency range	100	-	400	kHz
Dead Time	Minimum dead time between outputs	1.1	-	-	μs
Duty Cycle	Adjustable duty cycle range	0	-	100	%
Thermal Shutdown Temperature	Thermal shutdown threshold	-	160	-	°C
Storage Temperature	Operating temperature range for storage	-40	-	125	°C
Operating Temperature	Operating temperature range	-40	-	125	°C

Instructions for Using the SG3525AN:

1. Supply Voltage:

   • Ensure the supply voltage (Vcc) is within the range of 8V to 40V. The typical operating voltage is 15V.

2. Quiescent Current:

   • The total quiescent current at Vcc = 15V is typically 15mA. This should be considered when designing the power supply.

3. Output Voltage:

   • The output high-level voltage is typically 13.5V to 15V when Vcc = 15V and Iout = 10mA.
   • The output low-level voltage is typically 0V to 0.5V under the same conditions.

4. Frequency Adjustment:

   • The frequency can be adjusted from 100kHz to 400kHz using external components such as resistors and capacitors connected to the frequency control pins.

5. Dead Time:

   • The minimum dead time between the two outputs is 1.1μs to prevent shoot-through in power stages.

6. Duty Cycle:

   • The duty cycle can be adjusted from 0% to 100% using the duty cycle control pin.

7. Thermal Shutdown:

   • The device will automatically shut down if the internal temperature exceeds 160°C to protect against overheating.

8. Temperature Ranges:

   • The operating temperature range is -40°C to 125°C.
   • The storage temperature range is also -40°C to 125°C.

9. Pin Configuration:

   • Refer to the datasheet for the specific pin configuration and connections.

10. Application Circuits:

    • Use the application circuits provided in the datasheet as a reference for integrating the SG3525AN into your design.

11. Protection Circuits:

    • Implement appropriate protection circuits to safeguard the SG3525AN from overvoltage, overcurrent, and thermal issues.

12. Layout Considerations:

    • Follow good PCB layout practices to minimize noise and ensure stable operation, especially for high-frequency applications.

For detailed information and specific application notes, refer to the official datasheet of the SG3525AN.

(For reference only)