Details

---

BUY 24LC08BT/SN https://www.utsource.net/itm/p/12536155.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Operating Voltage	VCC		1.8	5.5		V
Standby Current	ICCS	VCC = 5.5V, VPP = 0V	1		5	μA
Active Current	ICCA	VCC = 5.5V, VPP = 0V	1	3	5	mA
Write Cycle Time	tWC		5			ms
Page Write Time	tPW		5			ms
Access Time	tAA		0.35		0.7	μs
Data Retention				100		years
Operating Temperature		Commercial Grade	0		70	°C
Industrial Grade			-40		85	°C
Storage Temperature			-65		150	°C
Endurance Cycles				1		million
Memory Capacity				1024		bytes
Organization				128		pages x 8 bytes

Instructions for Use

1. Power Supply:

   • Ensure the operating voltage (VCC) is within the range of 1.8V to 5.5V.
   • The device can operate at both commercial (0°C to 70°C) and industrial (-40°C to 85°C) temperature ranges.

2. Data Writing:

   • A write cycle takes a maximum of 5 milliseconds.
   • Page writes (writing to a single page) also take a maximum of 5 milliseconds.
   • Each page consists of 8 bytes.

3. Data Reading:

   • Access time for reading data is between 0.35 μs and 0.7 μs.

4. Standby and Active Current:

   • Standby current should be kept below 5 μA when not in use.
   • Active current should be kept below 5 mA during operation.

5. Endurance:

   • The device is rated for up to 1 million write cycles.

6. Data Retention:

   • Data retention is guaranteed for up to 100 years under normal operating conditions.

7. Storage Temperature:

   • Store the device in temperatures ranging from -65°C to 150°C.

8. Memory Organization:

   • The memory is organized into 128 pages, with each page containing 8 bytes.

9. Communication Protocol:

   • The 24LC08BT/SN uses the I2C protocol for communication. Ensure the I2C bus is properly configured with appropriate pull-up resistors.

10. Handling:

    • Handle the device with care to avoid electrostatic discharge (ESD) damage. Use proper ESD protection measures.

11. Mounting:

    • Solder the device according to the recommended soldering profile to ensure reliable performance.

By following these parameters and instructions, you can ensure optimal performance and longevity of the 24LC08BT/SN EEPROM.

(For reference only)