Details

---

BUY MCP6002T-I/SN https://www.utsource.net/itm/p/12536165.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	VDD	Operating Range	1.8		6.0	V
Quiescent Current	IQ	VDD = 5V		1.0		μA
Input Offset Voltage	VOS	RTI, VDD = 5V	-2		+2	mV
Input Bias Current	IB	VDD = 5V		25		pA
Slew Rate	SR			0.4		V/μs
Bandwidth	BW	Small Signal		1.0		MHz
Common Mode Rejection	CMRR	VDD = 5V		80		dB
Power Supply Rejection	PSRR	VDD = 5V		80		dB

Instructions for MCP6002T-I/SN

1. Power Supply:

   • Ensure the supply voltage (VDD) is within the operating range of 1.8V to 6.0V.

2. Quiescent Current Management:

   • The quiescent current is typically 1.0 μA at VDD = 5V. Design your circuit considering this low-power consumption.

3. Input Configuration:

   • Keep input offset voltage within ±2mV for optimal performance.
   • Be mindful of the input bias current which is around 25pA at VDD = 5V.

4. Performance Considerations:

   • The typical slew rate is 0.4 V/μs, suitable for applications requiring moderate speed.
   • For signal processing, note the small signal bandwidth is 1.0 MHz.

5. Noise and Interference:

   • Achieve a common mode rejection ratio (CMRR) of 80 dB and power supply rejection ratio (PSRR) of 80 dB to minimize noise interference.

6. Handling Precautions:

   • Follow standard precautions for handling electrostatic sensitive devices (ESD).
   • Ensure proper heat dissipation if used in high-temperature environments.

7. Application Specific Notes:

   • Refer to the detailed datasheet for application-specific guidelines and advanced configurations.

(For reference only)