Details

---

BUY EPM3064ATC100-10N https://www.utsource.net/itm/p/12536194.html

Parameter	Description	Value
Device	Device Name	EPM3064ATC100-10N
Package	Package Type	TQFP-100 (14x14mm)
Operating Temperature Range	Operating Temperature	-40°C to +85°C
Storage Temperature Range	Storage Temperature	-65°C to +150°C
Supply Voltage (VCC)	Supply Voltage Range	3.3V ± 5%
I/O Voltage (VCCIO)	I/O Voltage Range	3.3V ± 5% or 5V ± 5%
Configuration Voltage (VCCCONF)	Configuration Voltage Range	3.3V ± 5% or 5V ± 5%
Maximum Current per I/O Pin	I/O Pin Current	±25mA
Maximum Power Consumption	Total Power Consumption	1.5W (typical)
Configuration Memory	Configuration Memory Size	64K bits
Logic Cells	Number of Logic Cells	640
Max. User I/O Pins	User I/O Pins	72
Internal Oscillator Frequency	Internal Oscillator	10MHz (typical)
External Clock Input	External Clock Input Range	0 to 100MHz
Programmable I/O Standards	Supported I/O Standards	LVTTL, LVCMOS, SSTL-2, SSTL-3
Configuration Modes	Configuration Modes	JTAG, AS, PS, and USB Blaster (via Altera Programmer)
Configuration Time	Configuration Time	< 10ms (typical)
Standby Current	Standby Current	10μA (typical)
Active Current	Active Current	100mA (typical)
ESD Protection	ESD Protection Level	HBM: 2000V, MM: 200V
Lead-Free Compliance	RoHS Compliance	Yes
Warranty	Warranty	1 year

Instructions for Use:

1. Power Supply:

   • Ensure that the supply voltage (VCC) is within the specified range of 3.3V ± 5%.
   • The I/O voltage (VCCIO) can be set to either 3.3V ± 5% or 5V ± 5% depending on your application requirements.
   • The configuration voltage (VCCCONF) should also be set to either 3.3V ± 5% or 5V ± 5%.

2. Configuration:

   • Use one of the supported configuration modes: JTAG, Active Serial (AS), Passive Serial (PS), or USB Blaster via the Altera Programmer.
   • Ensure that the configuration time is less than 10ms for optimal performance.

3. I/O Handling:

   • Do not exceed the maximum current of ±25mA per I/O pin.
   • Support for various I/O standards including LVTTL, LVCMOS, SSTL-2, and SSTL-3.

4. Clocking:

   • The internal oscillator operates at a typical frequency of 10MHz.
   • For external clock inputs, ensure the frequency is within the range of 0 to 100MHz.

5. Environmental Conditions:

   • Operate the device within the specified temperature range of -40°C to +85°C.
   • Store the device in a temperature range of -65°C to +150°C.

6. Power Management:

   • The device has a typical standby current of 10μA and an active current of 100mA.
   • The maximum power consumption is 1.5W under typical conditions.

7. ESD Protection:

   • Handle the device with care to avoid ESD damage. The device is protected up to 2000V HBM and 200V MM.

8. Compliance:

   • The device is RoHS compliant and lead-free.

9. Warranty:

   • The device comes with a 1-year warranty.

For detailed specifications and additional information, refer to the datasheet provided by the manufacturer.

(For reference only)