Details

---

BUY M66592FP https://www.utsource.net/itm/p/12536196.html

Parameter	Symbol	Conditions	Min	Typical	Max	Unit
Supply Voltage	Vcc	Operating	4.5	-	5.5	V
Operating Temperature	Ta	Storage	-40	-	85	°C
Output Current	Iout	Continuous	-	100	150	mA
Quiescent Current	Iq	No Load	-	1.5	2.5	mA
Dropout Voltage	Vdo	Iout = 100mA	-	0.3	0.5	V
Load Regulation	ΔVout	Iout: 0 to 150mA	-	0.05	0.1	%
Line Regulation	ΔVout	Vcc: 4.5 to 5.5V	-	0.05	0.1	%
Ripple Rejection	RR	10Hz to 100kHz	-	60	70	dB
Thermal Shutdown	Tshut	Activation	-	150	170	°C
Protection	-	Overcurrent	-	-	-	Auto-Reset

Instructions for Use:

1. Power Supply Connection:

   • Connect the positive terminal of the power supply to the Vcc pin.
   • Connect the negative terminal (ground) to the GND pin.

2. Output Connection:

   • Connect the load to the Vout pin.
   • Ensure the load does not exceed the maximum output current (150mA).

3. Capacitors:

   • Place a 1μF ceramic capacitor between Vcc and GND as close to the regulator as possible.
   • Place a 1μF ceramic capacitor between Vout and GND to stabilize the output.

4. Thermal Management:

   • Ensure adequate heat dissipation if operating at high currents or in high ambient temperatures.
   • The device has thermal shutdown protection, but it should not be relied upon for continuous operation.

5. Overcurrent Protection:

   • The device has built-in overcurrent protection which will automatically reset once the fault condition is removed.

6. Operating Temperature:

   • Operate the device within the specified temperature range (-40°C to 85°C) to ensure reliable performance.

7. Storage:

   • Store the device in a dry, cool environment to prevent damage from moisture and extreme temperatures.

(For reference only)