Details

---

BUY NJU7048G https://www.utsource.net/itm/p/12536203.html

Parameter	Symbol	Min	Typical	Max	Unit
Supply Voltage	VCC	1.8	-	5.5	V
Output Voltage (High Level)	VOH	-	VCC - 0.3	VCC - 0.1	V
Output Voltage (Low Level)	VOL	0.0	0.1	0.3	V
Input Voltage (High Level)	VIH	0.7 * VCC	-	-	V
Input Voltage (Low Level)	VIL	-	-	0.3 * VCC	V
Input Leakage Current	IIL	-0.1	-	0.1	μA
Output Leakage Current	IOL	-20	-	20	μA
Propagation Delay Time (High to Low)	tPLH	-	5	-	ns
Propagation Delay Time (Low to High)	tPHL	-	5	-	ns
Operating Temperature Range	TOPR	-40	-	85	°C
Storage Temperature Range	TSTG	-65	-	150	°C

Instructions for Using NJU7048G

1. Supply Voltage (VCC):

   • Ensure the supply voltage is within the range of 1.8V to 5.5V.
   • Avoid exceeding the maximum supply voltage to prevent damage to the device.

2. Output Voltage Levels:

   • The output high level (VOH) should be at least VCC - 0.3V and can go up to VCC - 0.1V.
   • The output low level (VOL) should be between 0.0V and 0.3V.

3. Input Voltage Levels:

   • The input high level (VIH) should be at least 0.7 * VCC.
   • The input low level (VIL) should not exceed 0.3 * VCC.

4. Leakage Currents:

   • The input leakage current (IIL) should be within ±0.1 μA.
   • The output leakage current (IOL) should be within ±20 μA.

5. Propagation Delay:

   • The propagation delay time from high to low (tPLH) and from low to high (tPHL) is typically 5 ns.

6. Temperature Ranges:

   • The operating temperature range (TOPR) is from -40°C to 85°C.
   • The storage temperature range (TSTG) is from -65°C to 150°C.

7. Handling and Storage:

   • Store the device in a dry, cool place to avoid moisture damage.
   • Handle the device with care to prevent static damage. Use ESD protection when handling.

8. Circuit Design:

   • Ensure proper decoupling capacitors are placed close to the power pins to stabilize the supply voltage.
   • Follow good PCB layout practices to minimize noise and interference.

9. Testing:

   • Test the device under typical operating conditions to ensure it meets the specified parameters.
   • Use appropriate test equipment to measure input and output voltages, propagation delays, and leakage currents.

10. Compliance:

    • Ensure the device complies with all relevant safety and regulatory standards for your application.

(For reference only)