Details

---

BUY TLV2772QPWR https://www.utsource.net/itm/p/12536205.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	VCC	Operating	1.8	3.6	5.5	V
Quiescent Current	IQ	Per Amplifier, VCC = 3.3V	-	400	-	μA
Input Offset Voltage	VOS	VCC = 3.3V	-	2	10	mV
Input Bias Current	IB	VCC = 3.3V	-	50	150	nA
Input Voltage Range	VIN	VCC = 3.3V	0	-	VCC	V
Output Voltage Swing	VOUT	VCC = 3.3V, RL = 2kΩ to GND	0.02	-	3.28	V
Slew Rate	SR	VCC = 3.3V, RL = 2kΩ	-	0.6	-	V/μs
Bandwidth	fT	VCC = 3.3V, G = +1	-	1.4	-	MHz
Large Signal Voltage Gain	AV	VCC = 3.3V, G = +1	-	90	-	dB

Instructions for Using TLV2772QPWR:

1. Power Supply:

   • Ensure the supply voltage (V_CC) is within the operating range of 1.8V to 5.5V.
   • Connect the power supply to the V_CC pin and ground (GND) pin.

2. Input Configuration:

   • The input voltage range should be between 0V and V_CC.
   • Connect the input signals to the non-inverting (+) and inverting (-) input pins.

3. Output Configuration:

   • The output voltage swing can range from 0.02V to V_CC - 0.02V.
   • Connect the load resistor (RL) to the output pin and ground or another reference point.

4. Biasing and Stability:

   • Ensure the input bias current is within the specified range to avoid distortion.
   • Use appropriate feedback resistors to set the gain and ensure stability.

5. Operating Temperature:

   • The device is designed to operate in the extended temperature range of -40°C to 125°C.

6. Handling and Storage:

   • Handle the device with care to avoid damage from electrostatic discharge (ESD).
   • Store the device in a dry, cool place to prevent moisture damage.

7. Testing and Troubleshooting:

   • Use a multimeter to verify the supply voltage and output voltage.
   • Check for proper connections and signal levels at the input and output pins.
   • If the device does not function as expected, refer to the datasheet for additional troubleshooting tips.

(For reference only)