Details

---

BUY THC63LVDF64A https://www.utsource.net/itm/p/12536207.html

Parameter	Symbol	Min	Typ	Max	Unit	Description
Supply Voltage	VCC	1.6	-	3.6	V	Operating supply voltage range
Output Current per Channel	IO	-	24	-	mA	Maximum output current per channel
Data Rate	DR	-	800	-	Mbps	Maximum data rate
Propagation Delay	tpd	1.5	-	2.5	ns	Propagation delay time
Power Consumption	ICC	-	1.5	-	mA	Typical power consumption at no load
Operating Temperature	Topr	-40	-	85	°C	Operating temperature range
Storage Temperature	Tstg	-65	-	150	°C	Storage temperature range

Instructions for THC63LVDF64A:

1. Power Supply Connection:

   • Connect the VCC pin to a stable power supply within the range of 1.6V to 3.6V.
   • Ensure proper decoupling capacitors (typically 0.1μF) are placed close to the VCC and GND pins.

2. Signal Routing:

   • Keep signal traces as short as possible to minimize reflections and maintain signal integrity, especially at high data rates.
   • Use controlled impedance lines if operating at higher frequencies.

3. Grounding:

   • Maintain a solid ground plane beneath the device to reduce noise and improve performance.
   • Ensure all ground connections are robust and have low impedance.

4. Data Handling:

   • The device supports differential signaling; ensure differential pairs are well matched in length and impedance.
   • For optimal performance, terminate differential pairs with the appropriate termination resistor (usually 100Ω).

5. Thermal Management:

   • If operating in high-temperature environments or under heavy loads, consider thermal management techniques such as heat sinks or airflow improvements.

6. Handling and Storage:

   • Store the device in recommended environmental conditions to avoid damage.
   • Handle with care to prevent electrostatic discharge (ESD) damage; use ESD-safe equipment and practices.

(For reference only)