Details

---

BUY PC817XJ0000F https://www.utsource.net/itm/p/12536223.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Forward Voltage	V_F	IF = 20 mA		1.2	1.5	V
Reverse Breakdown Voltage	V_R	IR = 10 μA			5	V
Forward Current	I_F	Continuous, Ta = 25°C			50	mA
Peak Forward Current	I_FM	Pulse Width ≤ 1 ms, Duty ≤ 2%			300	mA
Emission Current Transfer Ratio	CTR	IF = 5 mA, RL = 100 Ω, Ta = 25°C	20	400		%
Rise Time	t_r	IF = 5 mA, VOH = 5 V			2	μs
Fall Time	t_f	IF = 5 mA, VOL = 0.4 V			2	μs
Storage Temperature	T_stg		-40		110	°C
Operating Temperature	T_op		-40		85	°C

Instructions for Use:

1. Mounting and Handling:

   • Handle with care to avoid damage to the leads or body.
   • Ensure proper alignment during mounting to prevent short circuits.

2. Electrical Connections:

   • Connect the anode and cathode correctly to avoid reverse polarity damage.
   • Ensure that the maximum ratings for forward current and reverse voltage are not exceeded.

3. Operating Environment:

   • Operate within the specified temperature range to ensure reliable performance.
   • Avoid exposing the device to environments with excessive moisture or corrosive gases.

4. Pulse Operation:

   • For pulse applications, ensure that the peak forward current does not exceed the specified limit.
   • Verify that the duty cycle and pulse width comply with the device specifications.

5. Storage:

   • Store in a dry, cool place away from direct sunlight.
   • Observe the recommended storage temperature limits to maintain long-term reliability.

6. Testing:

   • When testing, use appropriate test conditions as specified in the parameter table to ensure accurate results.
   • Avoid prolonged exposure to high currents or voltages during testing.

7. Application Considerations:

   • The PC817XJ0000F is suitable for various optocoupler applications including signal isolation and level shifting.
   • Ensure the load resistance (RL) is compatible with the emission current transfer ratio (CTR) for optimal performance.

(For reference only)