Details

---

BUY STP20NM60FD https://www.utsource.net/itm/p/12536507.html

Parameter	Symbol	Min	Typ	Max	Unit	Description
Drain-Source Voltage	VDS	-	-	600	V	Maximum voltage between drain and source with respect to ground
Gate-Source Voltage	VGS	-15	-	15	V	Maximum voltage between gate and source
Continuous Drain Current	ID	-	20	-	A	Maximum continuous current through the drain at 25°C case temperature
Pulse Drain Current	ID(p)	-	80	-	A	Maximum pulse current through the drain (tp = 10 μs, IG = 10 A)
Power Dissipation	PTOT	-	-	140	W	Maximum total power dissipation at TC = 25°C
Junction Temperature	TJ	-	-	175	°C	Maximum junction temperature
Storage Temperature	TSTG	-55	-	150	°C	Operating temperature range
Thermal Resistance	RθJC	-	0.5	-	°C/W	Junction-to-case thermal resistance

Instructions for Use:

1. Handling Precautions:

   • Avoid exposing the device to temperatures outside the specified operating range.
   • Handle the device with care to avoid mechanical damage.

2. Mounting:

   • Ensure proper heat sinking to maintain the junction temperature within safe limits.
   • Use appropriate mounting hardware to secure the device.

3. Electrical Connections:

   • Connect the gate, drain, and source terminals correctly to avoid damage.
   • Use short, low-inductance leads for high-frequency applications.

4. Gate Drive:

   • Apply a gate-source voltage (V_GS) within the specified limits to turn the device on or off.
   • Ensure the gate driver can provide sufficient current to charge and discharge the gate capacitance quickly.

5. Thermal Management:

   • Monitor the junction temperature to ensure it does not exceed the maximum rating.
   • Use thermal paste or thermal interface materials to improve heat transfer from the junction to the heatsink.

6. Surge Protection:

   • Implement surge protection circuits to protect against transient overvoltages and overcurrents.

7. Storage:

   • Store the device in a dry, cool place away from direct sunlight and corrosive environments.

8. Testing:

   • Perform initial testing at low power levels to verify correct operation before full-scale deployment.

(For reference only)