Details

---

BUY MCP1702-3302E/TO https://www.utsource.net/itm/p/12536512.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Input Voltage	VIN	Operating	1.8	-	6	V
Output Voltage	VOUT		-	3.3	3.3	V
Output Current	IOUT	Continuous	-	250	-	mA
Quiescent Current	IQ	VIN = 5V, VOUT = 3.3V	-	2	-	μA
Dropout Voltage	VDROPOUT	IOUT = 100mA, VIN = 5V	-	300	-	mV
Load Regulation	ΔVOUT/ΔIOUT	IOUT = 0 to 250mA	-	10	-	mV
Line Regulation	ΔVOUT/ΔVIN	VIN = 2.7 to 5.5V	-	5	-	mV
Power Dissipation	PD	TJ = 25°C	-	-	400	mW
Operating Junction Temp.	TJ		-40	-	85	°C

Instructions for Use:

1. Input Voltage (VIN): Ensure the input voltage is within the specified range of 1.8V to 6V. Exceeding these limits can damage the device.
2. Output Voltage (VOUT): The MCP1702-3302E/TO provides a fixed output voltage of 3.3V. Verify that this meets your application requirements.
3. Output Current (IOUT): The regulator can supply up to 250mA continuously. Design your circuit to stay within this limit to avoid overheating or damage.
4. Quiescent Current (IQ): The quiescent current is very low at 2μA, making it suitable for battery-powered applications where power consumption must be minimized.
5. Dropout Voltage (VDROPOUT): Keep the dropout voltage in mind when designing your power supply. For optimal performance, ensure the input voltage is sufficiently higher than the output voltage by at least 300mV at full load.
6. Load and Line Regulation: These parameters indicate the stability of the output voltage under varying load and input conditions. They are typically very good, ensuring stable operation.
7. Power Dissipation (PD): The maximum power dissipation should not exceed 400mW. Ensure proper heat sinking if operating near this limit.
8. Operating Temperature (TJ): The device operates reliably between -40°C and +85°C. Avoid exposing the device to temperatures outside this range.

For detailed specifications and more information, refer to the official Microchip Technology datasheet for the MCP1702-3302E/TO.

(For reference only)