Details

---

BUY PN8046 https://www.utsource.net/itm/p/12536513.html

Below is the parameter table and instructions for the PN8046 IC:

PN8046 Parameter Table

Parameter	Symbol	Min	Typical	Max	Unit
Input Voltage	V_IN	2.7	-	5.5	V
Output Voltage	V_OUT	1.2	-	5.0	V
Quiescent Current	I_Q	-	20	-	μA
Load Current	I_LOAD	-	300	-	mA
Dropout Voltage	V_DO	-	200	-	mV
Power Supply Rejection Ratio (PSRR) at 100 kHz	PSRR	-	60	-	dB
Operating Temperature	T_OP	-40	-	85	°C
Storage Temperature	T_STG	-65	-	150	°C
Thermal Resistance (θJA)	θJA	-	125	-	°C/W

Instructions for Using PN8046

1. Power Supply Connection:

   • Connect the input voltage (V_IN) to the power supply.
   • Ensure the input voltage is within the specified range (2.7V to 5.5V).

2. Output Configuration:

   • The output voltage (V_OUT) can be adjusted using external resistors if the IC supports it.
   • If fixed output voltage versions are used, ensure the correct part number is selected.

3. Grounding:

   • Connect the ground (GND) pin to the common ground of the circuit.

4. Load Connection:

   • Connect the load to the output (V_OUT) pin.
   • Ensure the load current does not exceed the maximum rated load current (300mA).

5. Capacitors:

   • Place a 1μF ceramic capacitor close to the input (V_IN) pin to filter out noise.
   • Place a 1μF ceramic capacitor close to the output (V_OUT) pin to stabilize the output.

6. Thermal Management:

   • Ensure adequate heat dissipation by providing a heatsink if the IC is expected to operate near its maximum power dissipation.
   • Check the thermal resistance (θJA) and ensure the operating temperature does not exceed 85°C.

7. Testing:

   • After assembly, test the output voltage with a multimeter to ensure it meets the desired specifications.
   • Test the load regulation by applying different load currents and monitoring the output voltage stability.

8. Storage:

   • Store the IC in a dry, cool place to avoid damage from moisture or extreme temperatures.

By following these instructions, you can ensure the proper operation and longevity of the PN8046 IC in your application.

(For reference only)