Details

---

BUY DCP010515DBP https://www.utsource.net/itm/p/12536516.html

Parameter	Symbol	Min	Typ	Max	Unit	Notes
Input Voltage	VIN	3.0	-	32	V
Output Voltage	VOUT	-	5.0	-	V	Fixed
Output Current	IOUT	-	1.0	-	A
Efficiency (Typical)	η	-	85	-	%	@ 12V IN, 5V OUT, 1A OUT
Quiescent Current	IQ	-	2.5	-	mA
Start-Up Time	tSTART	-	2	-	ms
Operating Temperature	TOPR	-40	-	85	°C
Storage Temperature	TSTG	-40	-	125	°C
Thermal Shutdown	TSD	-	160	-	°C
Protection Features	-	-	-	-	Overcurrent, Overtemperature

Instructions for Use:

1. Input Connection:

   • Connect the input voltage to the VIN pin. Ensure the input voltage is within the specified range (3.0V to 32V).
   • Connect the ground (GND) to the common ground of your system.

2. Output Connection:

   • Connect the load to the VOUT pin.
   • Ensure the load does not exceed the maximum output current (1.0A).

3. Powering Up:

   • Apply the input voltage to the VIN pin. The device will start up after approximately 2ms.
   • Monitor the output voltage to ensure it stabilizes at 5.0V.

4. Thermal Management:

   • Ensure adequate ventilation or cooling if operating at high temperatures or high power levels.
   • The device has built-in thermal shutdown protection to prevent damage from overheating.

5. Protection:

   • The device includes overcurrent and overtemperature protection. In case of a fault, the device will shut down to protect itself.

6. Storage:

   • Store the device in a dry environment with temperatures between -40°C and 125°C.

7. Handling:

   • Handle the device with care to avoid mechanical damage.
   • Follow ESD (Electrostatic Discharge) precautions to prevent damage to the device.

(For reference only)