Details

---

BUY BC547 https://www.utsource.net/itm/p/12536599.html

Parameter	Symbol	Min	Typ	Max	Unit
Collector-Emitter Voltage	VCEO	-	45	-	V
Collector-Base Voltage	VCBO	-	50	-	V
Emitter-Base Voltage	VEBO	-	6	-	V
Collector Current	IC	-	100	-	mA
Base Current	IB	-	5	-	mA
DC Current Gain	hFE	110	220	800	-
Transition Frequency	fT	-	300	-	MHz
Storage Temperature Range	TSTG	-55	-	150	°C
Operating Temperature Range	TA	-55	-	150	°C

Instructions for Using BC547 Transistor:

1. Polarity: Ensure that the transistor is connected with the correct polarity. The BC547 is an NPN transistor, meaning the collector should be more positive than the emitter.
2. Biasing: Proper biasing is crucial for the operation of the transistor. Use a voltage divider or other biasing circuits to ensure the base-emitter junction is forward-biased and the collector-emitter junction is reverse-biased.
3. Heat Dissipation: Although the BC547 can handle up to 100 mA of collector current, it may require a heat sink for continuous high-current applications to prevent overheating.
4. Protection Diodes: In switching applications, use a flyback diode across inductive loads to protect the transistor from voltage spikes.
5. Maximum Ratings: Do not exceed the maximum ratings listed in the table. Exceeding these values can lead to permanent damage.
6. Storage and Handling: Store the transistors in a dry environment and handle them with care to avoid static damage. Use anti-static wrist straps if necessary.
7. Testing: Before using the transistor in a circuit, test it with a multimeter to ensure it is functioning correctly. Check for continuity between the base and emitter, and ensure there is no short between the collector and emitter.

(For reference only)