Details

---

BUY BC183L https://www.utsource.net/itm/p/12538449.html

Parameter	Symbol	Min	Typical	Max	Unit
Collector-Emitter Voltage	VCE	-	45	-	V
Collector-Base Voltage	VCB	-	50	-	V
Emitter-Base Voltage	VEB	-	6	-	V
Collector Current	IC	-	100	-	mA
Base Current	IB	-	5	-	mA
Power Dissipation	PTOT	-	625	-	mW
Operating Temperature Range	TA	-55	-	150	°C
Storage Temperature Range	TSTG	-65	-	150	°C
Thermal Resistance, Junction to Case	RθJC	-	300	-	K/W

Instructions for Use:

1. Handling:

   • Handle the BC183L with care to avoid mechanical damage.
   • Use appropriate ESD (Electrostatic Discharge) precautions to prevent damage from static electricity.

2. Mounting:

   • Ensure proper alignment of the pins during soldering to avoid short circuits.
   • Do not exceed the maximum soldering temperature of 260°C for more than 10 seconds.

3. Biasing:

   • The base-emitter voltage (V_BE) is typically around 0.7V for forward bias.
   • Ensure that the base current (I_B) is sufficient to drive the collector current (I_C) as required by your application.

4. Operating Conditions:

   • Do not exceed the maximum ratings listed in the table to prevent damage to the device.
   • Operate within the specified temperature range to ensure reliable performance.

5. Storage:

   • Store the BC183L in a dry, cool place to prevent moisture damage.
   • Keep the devices in their original packaging until ready for use to protect them from environmental factors.

6. Testing:

   • Use a multimeter or transistor tester to verify the functionality of the BC183L before installation.
   • Test the device under controlled conditions to ensure it meets the required specifications.

(For reference only)