Details

---

BUY SKM300GA123D https://www.utsource.net/itm/p/12538462.html

Parameter	Symbol	Min	Typ	Max	Unit	Description
Rated Voltage	VDSS	-	1200	-	V	Maximum repetitive peak off-state voltage
Rated Current	IT(AV)	-	300	-	A	Average on-state current (Tc = 110°C, f = 50 Hz, sinewave)
On-State Voltage	VCE(on)	2.2	-	3.0	V	On-state voltage at IC = 300 A, VGE = 15 V
Gate Charge	QG	-	200	-	nC	Total gate charge at VGE(off) = -15 V, VGE(on) = 15 V, IC = 300 A
Turn-on Time	ton(d)	-	200	-	ns	Delay time from VGE to IC (10% to 90%)
Rise Time	tr	-	100	-	ns	Time for IC to rise from 10% to 90%
Turn-off Time	toff	-	150	-	ns	Time from IC(90%) to IC(10%)
Fall Time	tf	-	100	-	ns	Time for IC to fall from 90% to 10%
Junction Temperature	Tj	-40	-	175	°C	Operating junction temperature range
Storage Temperature	Tstg	-55	-	150	°C	Storage temperature range
Case Temperature	Tc	-40	-	125	°C	Operating case temperature range
Power Dissipation	Ptot	-	-	1500	W	Maximum power dissipation (Tc = 25°C)

Instructions:

1. Handling and Storage:

   • Store the device in a dry, cool place away from direct sunlight.
   • Handle with care to avoid mechanical damage.

2. Mounting:

   • Ensure proper heat sinking to maintain the junction temperature within the specified limits.
   • Use thermal compound to enhance heat transfer between the device and the heatsink.

3. Electrical Connections:

   • Connect the gate and source terminals correctly to avoid damage.
   • Use short and thick wires to minimize inductance and resistance.

4. Operational Conditions:

   • Do not exceed the maximum ratings for voltage, current, and temperature.
   • Ensure adequate cooling to prevent thermal runaway.

5. Testing:

   • Perform all tests under controlled conditions to avoid over-stressing the device.
   • Use appropriate test equipment and follow safety guidelines.

6. Safety:

   • Always use protective equipment when handling high-voltage or high-current circuits.
   • Follow all relevant safety standards and regulations.

(For reference only)