Details

---

BUY YM3021 https://www.utsource.net/itm/p/12538466.html

Parameter	Symbol	Min	Typ	Max	Unit	Description
Supply Voltage	Vcc	4.5	5.0	5.5	V	Operating voltage range
Current Consumption	ICC	-	20	-	mA	Quiescent current
Output Impedance	Zout	-	10	-	kΩ	Output impedance
Frequency Range	f	20	-	20	kHz	Frequency response range
Signal-to-Noise Ratio	SNR	-	70	-	dB	Signal-to-noise ratio
Total Harmonic Distortion	THD	-	0.5	-	%	Total harmonic distortion
Operating Temperature	Toper	-40	-	85	°C	Operating temperature range
Storage Temperature	Tstg	-65	-	150	°C	Storage temperature range

Instructions for Using YM3021

1. Power Supply:

   • Ensure the supply voltage (Vcc) is within the specified range of 4.5V to 5.5V.
   • Connect the power supply to the Vcc and GND pins.

2. Signal Input:

   • Connect the audio input signal to the IN pin.
   • Ensure the input signal level is appropriate for the device to avoid clipping or distortion.

3. Output Connection:

   • Connect the output to a load with an impedance of approximately 10kΩ.
   • Use a coupling capacitor if necessary to block DC components from the output.

4. Grounding:

   • Ensure a solid ground connection to minimize noise and interference.
   • Use a star grounding technique if multiple devices are connected to the same ground.

5. Temperature Considerations:

   • Operate the device within the temperature range of -40°C to 85°C.
   • Store the device in an environment where the temperature does not exceed -65°C to 150°C.

6. Signal-to-Noise Ratio:

   • The device has a typical signal-to-noise ratio (SNR) of 70dB, which ensures a clear audio output with minimal background noise.

7. Total Harmonic Distortion:

   • The total harmonic distortion (THD) is typically 0.5%, providing high-fidelity audio reproduction.

8. Frequency Response:

   • The frequency response range is from 20Hz to 20kHz, covering the full audible spectrum.

9. Current Consumption:

   • The quiescent current consumption is typically 20mA, making it suitable for battery-powered applications.

10. Handling:

    • Handle the device with care to avoid static damage.
    • Follow standard ESD (Electrostatic Discharge) precautions when handling the device.

By following these instructions, you can ensure optimal performance and longevity of the YM3021 component.

(For reference only)