Details

---

BUY 1.5KE220A https://www.utsource.net/itm/p/12541418.html

Parameter	Symbol	Value	Unit
Maximum Repetitive Peak Reverse Voltage	VRRM	220	V
Maximum DC Working Voltage	VRWM	160	V
Maximum Average Forward Rectified Current	IFTM	0.5	A
Maximum RMS Forward Current (8.3 ms half sine-wave)	IRMS	0.625	A
Maximum Non-Repetitive Peak Surge Current (8.3 ms one half cycle of a 60 Hz sine wave)	Ipp	47	A
Junction Operating Temperature Range	TJ	-55 to 150	°C
Storage Temperature Range	TSTG	-55 to 150	°C

Instructions for Use:

1. Voltage Handling: Ensure that the reverse voltage applied does not exceed the maximum repetitive peak reverse voltage (VRRM) of 220V to prevent damage.
2. Current Ratings: Operate within the specified average forward rectified current (IFTM) and RMS forward current (IRMS) limits to avoid overheating.
3. Surge Currents: The device can handle non-repetitive peak surge currents up to 47A, but this should not be exceeded as it can lead to premature failure.
4. Temperature Considerations: The operating junction temperature (TJ) should remain between -55°C and 150°C. Exceeding these limits can cause malfunction or damage.
5. Storage Conditions: When storing the component, ensure temperatures are within the storage range (-55°C to 150°C).
6. Mounting: Proper mounting is crucial to ensure adequate heat dissipation, especially if operating near maximum current ratings.

(For reference only)