Details

---

BUY IR2132 https://www.utsource.net/itm/p/12541450.html

Parameter	Symbol	Min	Typ	Max	Unit	Description
Supply Voltage	VCC	10	-	20	V	Operating supply voltage range
Undervoltage Lockout	UVLO	8.5	-	10	V	Threshold for undervoltage lockout
Input High Level	VIH	2.0	-	5.5	V	Minimum input high level voltage
Input Low Level	VIL	0	-	0.8	V	Maximum input low level voltage
Output High Level	VOH	13	-	VCC-1	V	Minimum output high level voltage
Output Low Level	VOL	0	-	1.5	V	Maximum output low level voltage
Propagation Delay Time	tpd	-	67	-	ns	Typical propagation delay time
Maximum Operating Frequency	fmax	-	500	-	kHz	Maximum operating frequency
Power Dissipation	PD	-	-	700	mW	Maximum power dissipation
Junction Temperature	TJ	-40	-	150	°C	Operating junction temperature range

Instructions for Using the IR2132:

1. Power Supply Setup:

   • Ensure the supply voltage (VCC) is within the specified range of 10V to 20V.
   • Check that the undervoltage lockout (UVLO) threshold is respected to avoid unintended operation.

2. Input Signal Levels:

   • The input signals should be within the defined levels: VIH > 2.0V for logic high and VIL < 0.8V for logic low.

3. Output Signals:

   • Verify that the output signals meet the required levels: VOH should be at least VCC - 1V for a high state, and VOL should not exceed 1.5V for a low state.

4. Timing Considerations:

   • Account for the propagation delay time (tpd) in your timing calculations to ensure accurate signal processing.

5. Frequency Operation:

   • Operate the device within its maximum frequency limit of 500kHz to maintain reliable performance.

6. Thermal Management:

   • Monitor the junction temperature (TJ) to stay within the -40°C to +150°C range to prevent overheating and ensure longevity.

7. Power Dissipation:

   • Keep the power dissipation below 700mW to avoid exceeding thermal limits and potential damage to the device.

8. Application-Specific Adjustments:

   • Tailor the setup parameters based on specific application requirements, ensuring compliance with all operational guidelines provided by the manufacturer.

(For reference only)