Details

---

BUY CG8010DX16 https://www.utsource.net/itm/p/12541476.html

Parameter	Value	Description
Part Number	CG8010DX16	-
Type	Digital IC	-
Function	10-bit A/D Converter	Converts analog signals to digital values
Resolution	10 bits	Number of bits for conversion
Conversion Time	2 μs (max)	Maximum time required for one conversion
Input Voltage Range	0 V to 5 V	Range of input voltages that can be converted
Reference Voltage	Internal 2.5 V	Built-in reference voltage for accurate conversion
Power Supply	4.5 V to 5.5 V	Operating voltage range
Current Consumption	2 mA (max)	Maximum current drawn during operation
Operating Temperature	-40°C to +85°C	Temperature range for reliable operation
Package	DIP-16	Dual Inline Package with 16 pins
Pins	16	Number of pins on the package
Pin Configuration	-	Refer to the datasheet for detailed pinout

Instructions for Use:

1. Power Supply:

   • Connect the VCC pin to a power supply between 4.5 V and 5.5 V.
   • Connect the GND pin to ground.

2. Analog Input:

   • Connect the analog signal to be converted to the AN_IN pin.
   • Ensure the input voltage is within the range of 0 V to 5 V.

3. Digital Output:

   • The digital output will be available on the D0 to D9 pins.
   • Connect these pins to your microcontroller or other digital device for reading the converted value.

4. Start Conversion:

   • Trigger the conversion by setting the START pin high.
   • The conversion process will take up to 2 μs.

5. Read Conversion Result:

   • After the conversion is complete, read the digital output from the D0 to D9 pins.

6. Reset:

   • To reset the converter, set the RESET pin high and then low.
   • This will initialize the converter and prepare it for the next conversion.

7. Temperature Considerations:

   • Ensure the operating temperature is within the specified range (-40°C to +85°C) for optimal performance.

8. Storage:

   • Store the IC in a dry, cool place to prevent damage.

For more detailed information, refer to the datasheet provided by the manufacturer.

(For reference only)