Details

---

BUY WJLXT971ALE.A4 https://www.utsource.net/itm/p/12541504.html

Parameter	Value	Unit
Part Number	WJLXT971ALE.A4
Type	Surface Mount
Package	0603 (1608 Metric)
Function	Chip Resistor
Resistance	1000	Ω
Tolerance	±0.5%
Power Rating	0.1	W
Operating Temperature	-55 to +125	°C
Max Working Voltage	100	V
TCR	±25 ppm/°C
ESD Rating	>1000V
Compliance	RoHS, REACH, Halogen-Free

Instructions for Use:

1. Handling:

   • Handle with care to avoid mechanical damage.
   • Use ESD-safe equipment and practices to prevent static damage.

2. Soldering:

   • Preheat components to 120°C for 1-2 minutes.
   • Solder at a temperature of 260°C for no more than 10 seconds.
   • Allow the component to cool naturally after soldering.

3. Mounting:

   • Ensure the PCB is clean and free from contaminants.
   • Apply a small amount of solder paste to the pads.
   • Place the resistor on the pads using a pick-and-place machine or tweezers.
   • Inspect the placement and alignment before reflow soldering.

4. Storage:

   • Store in a dry, cool place away from direct sunlight.
   • Use within 6 months of opening the packaging to ensure optimal performance.

5. Testing:

   • Verify resistance using a multimeter set to the appropriate range.
   • Check for any visual defects such as cracks or discoloration.

6. Disposal:

   • Dispose of the component according to local regulations for electronic waste.
   • Recycle whenever possible to reduce environmental impact.

(For reference only)