Details

---

BUY TSUMV53RWU-Z1 https://www.utsource.net/itm/p/12541607.html

Parameter	Description	Value	Unit
Part Number	Full part identifier	TSUMV53RWU-Z1	-
Package Type	Encapsulation type	TSSOP	-
Operating Temperature	Range of temperature for operation	-40 to +85	°C
Supply Voltage	Voltage range for power supply	2.7 to 5.5	V
Input Voltage	Maximum input voltage	5.5	V
Output Current	Continuous output current	50	mA
Quiescent Current	Current consumed when no load	1	μA
Shutdown Current	Current in shutdown mode	0.1	μA
PSRR	Power Supply Rejection Ratio at 1kHz	65	dB
Noise	Output noise voltage	28	μVrms
Slew Rate	Rate of change of output voltage	0.6	V/μs
Bandwidth	Frequency range	1.5	MHz

Instructions:

1. Power Supply Connection: Connect the supply voltage between VCC and GND pins, ensuring it is within the specified range.
2. Output Configuration: Connect the load between the output pin (OUT) and ground (GND). Ensure the load does not exceed the maximum output current.
3. Capacitor Requirements: Place a 1 μF capacitor between VCC and GND close to the device for stability.
4. Thermal Considerations: Ensure adequate heat dissipation if operating near the maximum supply voltage or output current limits.
5. Handling Precautions: Handle with care to avoid damage from electrostatic discharge (ESD); follow standard ESD handling protocols.
6. Operating Environment: Operate within the specified temperature range to ensure reliable performance.
7. Shutdown Mode: To enter shutdown mode, pull the SHDN pin low. This significantly reduces power consumption.
8. Noise Sensitivity: For optimal noise performance, place bypass capacitors as close as possible to the power supply pins.

(For reference only)