Details

---

BUY AP9578GH-H https://www.utsource.net/itm/p/12541616.html

Below is the parameter table and instructions for the AP9578GH-H:

Parameter Table

Parameter	Symbol	Min	Typ	Max	Unit
Input Voltage	VIN	2.7	-	5.5	V
Output Voltage	VOUT	-	3.3	-	V
Output Current	IOUT	-	1.5	2.0	A
Quiescent Current	IQ	-	1.0	2.0	μA
Dropout Voltage	VDROPOUT	-	0.2	0.3	V
Shutdown Current	ISD	-	0.1	0.2	μA
Operating Temperature	TOPR	-40	-	85	°C
Storage Temperature	TSTG	-65	-	150	°C

Instructions

1. Power Supply Connection:

   • Connect the input voltage (VIN) to the power supply.
   • Ensure the input voltage is within the range of 2.7V to 5.5V.

2. Output Configuration:

   • The output voltage (VOUT) is fixed at 3.3V.
   • Connect the load to the output terminal (VOUT).

3. Ground Connection:

   • Connect the ground (GND) pin to the system ground.

4. Capacitors:

   • Place a 1μF ceramic capacitor close to the input (VIN) and output (VOUT) pins to ensure stability.
   • For better performance, you can use a 10μF tantalum or ceramic capacitor on the output.

5. Shutdown Function:

   • To enable the shutdown function, connect the SHDN pin to GND.
   • To activate the device, connect the SHDN pin to VIN or leave it floating.

6. Thermal Management:

   • Ensure proper heat dissipation if the device is operating at high current levels.
   • Use a heatsink if necessary, especially when the ambient temperature is high.

7. Storage and Handling:

   • Store the device in a dry environment with temperatures between -65°C and 150°C.
   • Handle the device with care to avoid damage from electrostatic discharge (ESD).

8. Testing:

   • Before integrating the device into your circuit, test it with a simple load to verify its functionality.
   • Monitor the output voltage and current to ensure they meet the specified parameters.

By following these instructions, you can ensure optimal performance and reliability of the AP9578GH-H in your application.

(For reference only)