Details

---

BUY SN75LBC180N https://www.utsource.net/itm/p/12541639.html

Parameter	Conditions	Min	Typ	Max	Unit
Supply Voltage (Vcc)	Operating	2.7		5.5	V
Input Voltage High (VIH)	Vcc = 5V	3.15		5.5	V
Input Voltage Low (VIL)	Vcc = 5V	0		1.35	V
Output Voltage High (VOH)	Vcc = 5V, IO = -1mA	3.5		5.0	V
Output Voltage Low (VOL)	Vcc = 5V, IO = 16mA	0		0.4	V
Propagation Delay (tPD)	Vcc = 5V, VOH to VOL or VOL to VOH		8		ns
Power Dissipation	Maximum			650	mW
Operating Temperature	Commercial	0		70	°C
Storage Temperature		-65		150	°C

Instructions for Use:

1. Power Supply:

   • Ensure the supply voltage is within the specified range of 2.7V to 5.5V.

2. Input Signal Levels:

   • For proper logic recognition, input voltages should be within the defined VIH and VIL levels relative to the supply voltage.

3. Output Load Considerations:

   • The device can source up to 16mA and sink up to -1mA at its output pins. Design circuits ensuring these current limits are not exceeded to avoid damage.

4. Propagation Delay:

   • Account for a typical propagation delay of 8ns when designing timing-sensitive applications.

5. Thermal Management:

   • Keep the operating temperature within the commercial range of 0°C to 70°C. For extended temperature ranges, consult additional datasheets or application notes.

6. Storage Handling:

   • Store devices in environments where temperatures do not exceed -65°C to 150°C to prevent degradation.

7. Power Dissipation:

   • Ensure that the power dissipation does not exceed 650mW to maintain reliable operation and prevent overheating.

8. Electrostatic Discharge (ESD) Protection:

   • Handle with care as the device may be sensitive to ESD; use appropriate ESD protection measures during handling and installation.

9. Mounting and Soldering:

   • Follow recommended soldering profiles and mounting guidelines to ensure robust connections without damaging the component.

(For reference only)