Details

---

BUY LT1248CS#PBF https://www.utsource.net/itm/p/12541646.html

Parameter	Min	Typ	Max	Unit	Description
Supply Voltage	2.7	-	5.5	V	Operating supply voltage range
Input Offset Voltage	-	1.5	-	mV	Maximum input offset voltage
Input Bias Current	-	0.5	-	nA	Typical input bias current
Slew Rate	-	28	-	V/μs	Slew rate
Bandwidth (-3dB)	-	60	-	MHz	Small signal bandwidth
Output Current (Short-Circuit)	-	25	-	mA	Output short-circuit current
Power Supply Rejection Ratio	-	90	-	dB	Power supply rejection ratio at 10 kHz
Operating Temperature Range	-40	-	85	°C	Operating temperature range

Instructions for LT1248CS#PBF:

1. Power Supply Connections:

   • Connect the positive supply to pin 8 and the negative supply to pin 4.
   • Ensure that the supply voltage is within the specified range of 2.7V to 5.5V.

2. Input Configuration:

   • Non-inverting input (pin 3) and inverting input (pin 2) should be connected according to the application circuit.
   • Keep input voltages within the common-mode range to avoid distortion or damage.

3. Output Connection:

   • The output (pin 6) can drive loads directly but ensure not to exceed the maximum output current capability of 25mA.
   • For high-frequency applications, consider adding a small capacitor between the output and ground to stabilize the output.

4. Grounding:

   • Pin 4 serves as the ground connection; ensure a solid connection to maintain stability and minimize noise.

5. Thermal Considerations:

   • The device operates efficiently within the temperature range of -40°C to +85°C.
   • For extended operation at higher temperatures, ensure adequate heat dissipation.

6. Handling Static Electricity:

   • The device is sensitive to static electricity; use proper handling techniques to prevent damage.

7. Storage and Handling:

   • Store in original packaging until ready for use to protect from moisture and physical damage.
   • Follow standard ESD precautions during handling and assembly.

8. Mounting:

   • Use recommended PCB layout guidelines for optimal performance.
   • Ensure all connections are secure and soldered properly to avoid intermittent issues.

(For reference only)