Details

---

BUY LMH6624MA https://www.utsource.net/itm/p/12541657.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	Vcc		2.7		5.5	V
Quiescent Current	IQ	Vcc = 3V		10		mA
Output Current	IOUT		0	60	100	mA
Gain Bandwidth Product	GBP			480		MHz
Slew Rate	SR			1200		V/μs
Input Offset Voltage	VIO		-2	0	2	mV
Input Bias Current	IB		-1	0	1	nA
Common Mode Input Range	VICR		Vss-0.2		Vcc+0.2	V
Output Swing	VOSW	RL=1kΩ to Vcc/2	1.2		3.8	V

Instructions for LMH6624MA

1. Power Supply Requirements:

   • Ensure the supply voltage is within the range of 2.7V to 5.5V.

2. Installation and Handling:

   • Handle with care to avoid static damage.
   • Install in a clean environment to prevent contamination.

3. Operating Temperature:

   • Operate within the temperature range specified by the manufacturer to ensure reliable performance.

4. Input Signal:

   • Ensure input signals are within the common mode input range to avoid distortion or damage.

5. Output Load:

   • Connect appropriate load resistors (e.g., 1kΩ) to achieve optimal output swing.

6. Decoupling Capacitors:

   • Place decoupling capacitors close to the power supply pins to reduce noise and improve stability.

7. Grounding:

   • Ensure proper grounding to minimize noise and interference.

8. Testing:

   • Test the device under typical operating conditions before deployment to verify performance specifications.

(For reference only)