Details

---

BUY AM1D-0505SH40Z https://www.utsource.net/itm/p/12541673.html

Below is the parameter table and instructions for the AM1D-0505SH40Z:

Parameter Table

Parameter	Symbol	Min	Typ	Max	Unit
Input Voltage	VIN	4.5	-	5.5	V
Output Voltage	VOUT	5.0	-	5.0	V
Output Current	IOUT	-	4.0	4.0	A
Efficiency	η	-	85	-	%
Switching Frequency	fSW	-	500	-	kHz
Operating Temperature	TOPR	-40	-	85	°C
Storage Temperature	TSTG	-40	-	125	°C
Quiescent Current	IQ	-	1.0	-	mA
Load Regulation	-	-	±1	-	%
Line Regulation	-	-	±1	-	%
Ripple Voltage	VRIPPLE	-	30	-	mVpp
Start-Up Time	tSTART	-	2.0	-	ms
Shutdown Current	ISD	-	10	-	μA

Instructions

1. Input Connection:

   • Connect the input voltage (VIN) to the positive terminal of the power supply.
   • Ensure the input voltage is within the specified range (4.5V to 5.5V).

2. Output Connection:

   • Connect the output voltage (VOUT) to the load.
   • The maximum output current is 4.0A.

3. Ground Connection:

   • Ensure a common ground connection between the input and output circuits.

4. Thermal Management:

   • Place the device on a heatsink or a PCB with adequate copper area to dissipate heat.
   • Ensure the operating temperature does not exceed 85°C.

5. Capacitors:

   • Use input and output capacitors as recommended by the datasheet to stabilize the circuit.
   • Typical values are 10μF for input and 10μF for output.

6. Start-Up and Shutdown:

   • The device will start up when the input voltage reaches the minimum threshold.
   • The shutdown current is very low (10μA) to minimize power consumption when the device is off.

7. Protection Features:

   • The device includes overcurrent protection and thermal shutdown to prevent damage under fault conditions.

8. Storage:

   • Store the device in a dry environment with temperatures between -40°C and 125°C.

9. Handling:

   • Handle the device with care to avoid mechanical stress and electrostatic discharge (ESD).

By following these parameters and instructions, you can ensure optimal performance and reliability of the AM1D-0505SH40Z.

(For reference only)