Details

---

BUY AD9220ARZ https://www.utsource.net/itm/p/12541793.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	VDD	Operating	4.75	5.0	5.25	V
Analog Input Range	VIN	Differential	-1.0	1.0	1.0	Vpp
Sampling Rate	fS			65		MSPS
Power Consumption	IDD	All channels on, VDD = 5V	180			mA
Signal-to-Noise Ratio	SNR	fIN = 70 MHz	63			dB
Spurious-Free Dynamic Range	SFDR	fIN = 70 MHz	72			dBc
Integral Nonlinearity	INL		-1.5		+1.5	LSB
Differential Nonlinearity	DNL		-1.0		+1.0	LSB
Output Data Format				Parallel CMOS/TTL
Output Data Rate	fOUT			65		MSPS

Instructions for Using AD9220ARZ

1. Power Supply:

   • Connect the VDD pin to a 5V power supply with a tolerance of ±5%.
   • Ensure a stable power supply by using decoupling capacitors (e.g., 0.1 μF and 10 μF) placed close to the VDD pin.

2. Analog Input:

   • Apply a differential analog input signal within the range of -1.0 V to +1.0 V.
   • Use a low-pass filter to prevent aliasing if the input signal contains frequencies above the Nyquist frequency (fS/2).

3. Sampling Rate:

   • Set the sampling rate to 65 MSPS by providing a clock signal to the CLK pin.
   • Ensure the clock signal is clean and stable to avoid timing errors.

4. Output Configuration:

   • The AD9220ARZ provides parallel CMOS/TTL output data.
   • Connect the output pins to your digital system, ensuring proper signal integrity and termination.

5. Power Consumption:

   • Monitor the power consumption, which should be around 180 mA when all channels are active and VDD is 5V.

6. Signal-to-Noise Ratio (SNR):

   • For optimal performance, ensure the input signal is within the specified range and free from noise.

7. Spurious-Free Dynamic Range (SFDR):

   • To achieve the best SFDR, minimize external interference and use high-quality components in the signal path.

8. Linearity:

   • Check the INL and DNL specifications to ensure accurate conversion. If necessary, apply calibration techniques to improve linearity.

9. Data Format:

   • Configure the output data format according to your system requirements. The AD9220ARZ supports parallel CMOS/TTL output.

10. Operating Temperature:

    • Ensure the device operates within the specified temperature range to maintain performance and reliability.

11. Storage and Handling:

    • Store the device in a dry, static-free environment to prevent damage.
    • Handle the device with care to avoid electrostatic discharge (ESD) damage.

For detailed information and specific application notes, refer to the AD9220ARZ datasheet provided by Analog Devices.

(For reference only)