Details

---

BUY SM7012 https://www.utsource.net/itm/p/12541826.html

Parameter	Symbol	Min	Typ	Max	Unit
Input Voltage	V_IN	2.5	-	5.5	V
Output Voltage	V_OUT	-	3.3	-	V
Output Current	I_OUT	-	1200	-	mA
Quiescent Current	I_Q	-	20	-	μA
Efficiency	η	-	92	-	%
Dropout Voltage	V_DO	-	120	-	mV
Operating Temperature	T_OP	-40	-	85	°C
Storage Temperature	T_STG	-65	-	150	°C

Instructions for Using the SM7012

1. Input Connection:

   • Connect the input voltage (V_IN) to the positive terminal of the power source.
   • Ensure the input voltage is within the range of 2.5V to 5.5V.

2. Output Connection:

   • Connect the output voltage (V_OUT) to the load or circuit that requires a stable 3.3V supply.
   • The maximum output current is 1200mA. Ensure the load does not exceed this limit.

3. Ground Connection:

   • Connect the ground (GND) of the input and output to a common ground point.

4. Thermal Management:

   • The device can operate at temperatures from -40°C to 85°C. For extended operation at high currents or in high ambient temperatures, consider using a heatsink or providing adequate ventilation.

5. Efficiency:

   • The typical efficiency of the SM7012 is 92%. This means that most of the input power is converted to output power, with minimal loss as heat.

6. Dropout Voltage:

   • The dropout voltage is typically 120mV. This is the minimum difference between the input and output voltages required to maintain regulation.

7. Storage:

   • Store the device in a dry place with temperatures ranging from -65°C to 150°C.

8. Handling:

   • Handle the device with care to avoid damage. Use proper ESD (Electrostatic Discharge) protection when handling the device.

9. Testing:

   • Before connecting the device to your final application, test it with a known load to ensure it meets the required specifications.

10. Troubleshooting:

    • If the output voltage is not stable, check the input voltage and connections.
    • If the device overheats, ensure proper thermal management and reduce the load if necessary.

(For reference only)