Details

---

BUY HR1001BGS https://www.utsource.net/itm/p/12541832.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	VDD	Operating	2.7		5.5	V
Output Current	IO	Continuous		100		mA
Quiescent Current	IQ	VDD = 5V		10		μA
Input Offset Voltage	VIO	VDD = 5V	-5		+5	mV
Bandwidth	BW			1.5		MHz
Slew Rate	SR			0.5		V/μs
Power Consumption	PCON	VDD = 5V		50		mW
Operating Temperature	TOPR	Storage	-40		85	°C

Instructions for HR1001BGS

1. Power Supply Connection:

   • Connect the positive terminal of the power supply to the VDD pin and the negative terminal to the GND pin.
   • Ensure the supply voltage is within the range of 2.7V to 5.5V.

2. Input Signal Handling:

   • Apply the input signal to the IN+ and IN- pins. Be mindful of the input offset voltage which can be between -5mV to +5mV at VDD = 5V.

3. Output Configuration:

   • The output can drive up to 100mA continuously. Connect the load to the OUT pin, ensuring it does not exceed this current limit.

4. Quiescent Current Consideration:

   • At a supply voltage of 5V, the quiescent current is typically 10μA. Design your circuit to account for this in low-power applications.

5. Temperature Range:

   • Operate the device within the temperature range of -40°C to 85°C to ensure reliable performance.

6. Bandwidth and Slew Rate:

   • For applications requiring high-speed operation, note that the bandwidth is typically 1.5MHz and the slew rate is 0.5V/μs.

7. Power Consumption:

   • At 5V supply, the typical power consumption is 50mW. Optimize your design to manage heat dissipation if operating near maximum power.

8. Storage:

   • When not in use, store the device in an environment that maintains temperatures within the specified operating range to prevent damage.

Ensure all connections are secure and double-check polarity before powering on the device. Follow these guidelines to achieve optimal performance from the HR1001BGS.

(For reference only)