Details

---

BUY 5D-11 https://www.utsource.net/itm/p/12541834.html

Parameter	Description
Part Number	5D-11
Type	Relay
Coil Voltage	12V DC
Coil Resistance	400 Ohms
Contact Form	SPDT (Single Pole, Double Throw)
Contact Rating	10A at 250V AC
Insulation Voltage	1000V AC
Operating Temperature	-40°C to +85°C
Switching Time	10ms (max)
Mounting	PCB mount
Dimensions	17.5mm x 12.5mm x 12.5mm

Instructions:

1. Installation: Ensure the relay is mounted on a compatible PCB. Verify that the PCB layout matches the pin configuration of the 5D-11.
2. Coil Connection: Connect the coil terminals to a 12V DC power supply. Ensure correct polarity for reliable operation.
3. Contact Wiring: Wire the common (COM), normally open (NO), and normally closed (NC) contacts according to your circuit requirements.
4. Testing: After installation, test the relay by applying the rated voltage to the coil and verifying the switching action of the contacts.
5. Operational Environment: Operate the relay within the specified temperature range to ensure longevity and performance.
6. Maintenance: No special maintenance required under normal operating conditions. Avoid exposing the relay to excessive moisture or corrosive environments.

(For reference only)