Details

---

BUY 6N136 https://www.utsource.net/itm/p/12541860.html

Parameter	Symbol	Min	Typ	Max	Unit	Notes
Forward Current Transfer Ratio (CTR)	CTR	-	20	100	%
Input Forward Voltage	VIF	1.0	1.2	1.4	V	@ IF = 5mA, TA = 25°C
Output Collector-Emitter Saturation Voltage	VCE(sat)	-	0.5	1.5	V	@ IC = 5mA, IE = 0mA, TA = 25°C
Output Collector-Emitter Leakage Current	ICE(off)	-	100	500	nA	@ VCE = 5V, IF = 0mA, TA = 25°C
Input Current	IF	-	-	20	mA	Continuous
Output Collector Current	IC	-	-	15	mA	Continuous
Storage Temperature Range	TSTG	-40	-	125	°C
Operating Temperature Range	TA	-40	-	105	°C

Instructions for Use:

1. Mounting:

   • Ensure the 6N136 is mounted on a PCB with appropriate soldering techniques.
   • Avoid excessive heat during soldering to prevent damage to the device.

2. Biasing:

   • The input LED should be biased with a current within the specified range (0 to 20mA).
   • The output transistor should be biased to ensure it operates within its safe operating area.

3. Power Supply:

   • The output side of the 6N136 can handle a maximum collector-emitter voltage (V_CE) of 30V.
   • Ensure the power supply voltage does not exceed this limit.

4. Signal Isolation:

   • The 6N136 provides galvanic isolation between the input and output sides, making it suitable for applications requiring electrical isolation.

5. Temperature Considerations:

   • Operate the device within the specified temperature range to avoid thermal stress and potential failure.
   • For extended reliability, consider derating the device at higher temperatures.

6. Storage:

   • Store the 6N136 in a dry, cool place to prevent moisture damage.
   • Follow ESD (Electrostatic Discharge) precautions to avoid damaging the device.

7. Testing:

   • Before final assembly, test the 6N136 to ensure it meets the specified parameters.
   • Use a multimeter or other appropriate test equipment to verify functionality.

8. Handling:

   • Handle the 6N136 with care to avoid mechanical damage.
   • Use appropriate tools and techniques when handling and installing the device.

(For reference only)