Details

---

BUY IM03GR https://www.utsource.net/itm/p/12541871.html

Parameter	Description	Value
Part Number	Full part number	IM03GR
Type	Device type	MOSFET
Technology	Technology used	Silicon
Package	Package type	TO-220
VDSS	Drain-to-source voltage (max)	30 V
RDS(on)	On-state resistance at 10 V gate drive	3.5 mΩ (max)
ID	Continuous drain current (max)	100 A
IGSS	Gate-to-source leakage current (max)	±100 nA
QG	Total gate charge	60 nC (typ)
QGD	Gate-drain charge	15 nC (typ)
Eoss	Output capacitance energy loss	120 nJ (typ)
fT	Transition frequency	2.5 MHz (typ)
Operating Temp.	Operating temperature range	-55°C to +175°C
Storage Temp.	Storage temperature range	-65°C to +175°C

Instructions for Use

1. Handling Precautions:

   • Handle with care to avoid damage to the leads and body.
   • Use ESD (Electrostatic Discharge) protection when handling to prevent damage from static electricity.

2. Mounting:

   • Ensure proper heat sinking to maintain operating temperatures within the specified range.
   • Use thermal paste or thermal tape to enhance thermal conductivity between the device and the heatsink.

3. Soldering:

   • Preheat the PCB to reduce thermal shock.
   • Soldering temperature should not exceed 260°C for more than 10 seconds.
   • Allow the device to cool naturally after soldering.

4. Biasing:

   • Apply a gate voltage of at least 10 V to ensure the MOSFET is fully turned on and operates in the linear region.
   • Avoid applying excessive gate voltage to prevent damage to the gate oxide.

5. Protection:

   • Use appropriate overvoltage and overcurrent protection circuits to safeguard the MOSFET.
   • Consider using snubber circuits to suppress voltage spikes during switching.

6. Testing:

   • Test the device under controlled conditions to verify its performance.
   • Measure the drain-source voltage and current to ensure they are within the specified limits.

7. Storage:

   • Store in a dry, cool place to prevent moisture absorption.
   • Keep the devices in their original packaging until ready for use.

(For reference only)