Details

---

BUY SN65HVD72DR https://www.utsource.net/itm/p/12541877.html

Parameter	Symbol	Min	Typ	Max	Unit	Notes
Supply Voltage	VCC	4.75	5	5.25	V
Output High-Level Voltage	VOH	-	3.9	5	V	@ IOH = -4mA, VCC = 5V
Output Low-Level Voltage	VOL	0	0.4	-	V	@ IOL = 16mA, VCC = 5V
Input High-Level Voltage	VIH	2	-	5.5	V
Input Low-Level Voltage	VIL	0	-	0.8	V
Differential Output Voltage	VOD	1.1	1.2	1.3	V
Common-Mode Output Voltage	VOCM	1.4	1.65	1.9	V
Driver Enable Input Current	IEN	-1	0	1	μA	@ VEN = 0V, VCC = 5V
Driver Disable Input Current	IEN	-1	0	1	μA	@ VEN = 5V, VCC = 5V
Short-Circuit Current	ISC	-	30	-	mA	@ VCC = 5V, T = 25°C
Operating Temperature Range	Toper	-40	-	85	°C
Storage Temperature Range	Tstg	-65	-	150	°C

Instructions for Using SN65HVD72DR

1. Power Supply:

   • Ensure the supply voltage (VCC) is within the range of 4.75V to 5.25V.
   • Connect VCC to the positive terminal of your power supply and GND to the ground.

2. Signal Levels:

   • For the driver to be enabled, apply a high-level voltage (VIH) to the enable pin (VEN).
   • For the driver to be disabled, apply a low-level voltage (VIL) to the enable pin (VEN).

3. Output Voltage:

   • The differential output voltage (VOD) should be between 1.1V and 1.3V.
   • The common-mode output voltage (VOCM) should be between 1.4V and 1.9V.

4. Current Considerations:

   • The driver enable input current (IEN) should not exceed ±1μA.
   • In case of short-circuit, the short-circuit current (ISC) should be limited to 30mA to prevent damage.

5. Temperature:

   • The operating temperature range (Toper) is from -40°C to 85°C.
   • The storage temperature range (Tstg) is from -65°C to 150°C.

6. Handling and Storage:

   • Handle the device with care to avoid static discharge.
   • Store the device in a dry environment within the specified storage temperature range.

7. Application Notes:

   • This device is suitable for CAN (Controller Area Network) applications.
   • Ensure proper termination resistors are used on the CAN bus to maintain signal integrity.

By following these parameters and instructions, you can ensure reliable operation of the SN65HVD72DR in your application.

(For reference only)