Details

---

BUY TD350E https://www.utsource.net/itm/p/12542470.html

Parameter	Description	Value
Part Number	Full Part Number	TD350E
Type	Type of Component	MOSFET
Polarity	Polarity	N-Channel
VDS	Drain-Source Voltage	30V
VGS	Gate-Source Voltage	±20V
ID	Continuous Drain Current	50A
RDS(on)	On-State Resistance (at VGS = 10V)	4.5mΩ
Power Dissipation	Maximum Power Dissipation (TC = 25°C)	150W
Operating Temperature	Junction Temperature Range	-55°C to +175°C
Storage Temperature	Storage Temperature Range	-65°C to +150°C
Package	Package Type	TO-220
Mounting Type	Mounting Type	Through-Hole

Instructions for Use

1. Handling Precautions:

   • Handle the TD350E with care to avoid damage to the leads or the body.
   • Use proper ESD (Electrostatic Discharge) protection when handling to prevent damage from static electricity.

2. Soldering:

   • Preheat the PCB to 100°C to 150°C before soldering.
   • Soldering temperature should not exceed 300°C.
   • Soldering time should be kept under 3 seconds per lead.

3. Mounting:

   • Ensure that the heatsink is properly attached to the component to dissipate heat effectively.
   • Use thermal grease between the component and the heatsink for better thermal conductivity.

4. Electrical Connections:

   • Connect the drain (D), source (S), and gate (G) terminals correctly.
   • Ensure that the gate voltage does not exceed the maximum rated V_GS.

5. Thermal Management:

   • Monitor the junction temperature to ensure it stays within the operating range.
   • Use adequate cooling methods, such as forced air or liquid cooling, if necessary.

6. Testing:

   • Test the component in a controlled environment to verify its performance and reliability.
   • Use a multimeter or oscilloscope to check the continuity and functionality of the MOSFET.

7. Storage:

   • Store the TD350E in a dry, cool place away from direct sunlight and sources of heat.
   • Keep the components in their original packaging until ready for use to protect against moisture and static damage.

(For reference only)