Details

---

BUY TPF143 https://www.utsource.net/itm/p/12542481.html

Below is the parameter table and instructions for the TPF143 electronic component:

TPF143 Parameter Table

Parameter	Symbol	Min	Typ	Max	Unit
Supply Voltage	Vcc	2.7	5.0	5.5	V
Operating Temperature	Ta	-40		85	°C
Storage Temperature	Tstg	-65		150	°C
Input Voltage Range	Vin	0		Vcc	V
Output Current	Iout		100	150	mA
Quiescent Current	Iq		10	20	μA
Dropout Voltage	Vdo		0.3	0.5	V
PSRR (10 Hz to 100 kHz)	PSRR		70		dB
Line Regulation	Lreg		0.1	0.2	%/V
Load Regulation	Ldreg		0.1	0.2	%/mA
Transient Response	Tr		10	20	μs

Instructions for TPF143

1. Power Supply Connection:

   • Connect the supply voltage (Vcc) to the input pin.
   • Ensure the supply voltage is within the specified range (2.7V to 5.5V).

2. Ground Connection:

   • Connect the ground (GND) pin to the system ground.

3. Output Connection:

   • Connect the output pin to the load or the next stage of your circuit.
   • The maximum output current should not exceed 150 mA.

4. Capacitor Requirements:

   • Place a 1 μF ceramic capacitor between the input pin and ground as close as possible to the device.
   • Place a 1 μF ceramic capacitor between the output pin and ground as close as possible to the device.

5. Thermal Considerations:

   • Ensure adequate heat dissipation if operating at high output currents or in high ambient temperatures.
   • The operating temperature range is -40°C to 85°C.

6. Stability:

   • The device is stable with ceramic capacitors. Avoid using electrolytic capacitors on the output without additional series resistance.

7. Transient Response:

   • The device has a typical transient response time of 10 μs to 20 μs. Ensure that the load does not change too rapidly to avoid instability.

8. Storage:

   • Store the device in a dry, cool place within the storage temperature range of -65°C to 150°C.

9. Handling:

   • Handle the device with care to avoid damage to the pins and internal components.
   • Use appropriate ESD (Electrostatic Discharge) protection when handling the device.

By following these instructions, you can ensure optimal performance and reliability of the TPF143 in your application.

(For reference only)