Details

---

BUY ICL8038AMJD https://www.utsource.net/itm/p/12542488.html

Parameter	Symbol	Min	Typ	Max	Unit	Description
Supply Voltage	Vcc	10	15	24	V	Operating supply voltage
Output Amplitude	Vo	-	Vcc/2	-	V	Peak-to-peak output amplitude
Frequency Range	f	0.01	-	20	kHz	Output frequency range
Duty Cycle Range	D	0.1	-	0.9	-	Adjustable duty cycle
Temperature Range	T	-40	-	85	°C	Operating temperature range
Power Dissipation	Pd	-	375	-	mW	Maximum power dissipation
Output Rise Time	tr	-	200	-	ns	Output rise time
Output Fall Time	tf	-	200	-	ns	Output fall time

Instructions for ICL8038AMJD

1. Supply Voltage Connection:

   • Connect the supply voltage (Vcc) to pin 11 and ground (GND) to pin 6.
   • Ensure the supply voltage is within the specified range (10V to 24V).

2. Frequency Adjustment:

   • Connect external resistors and capacitors to pins 8, 9, and 10 for setting the frequency.
   • Use the formula ( f = frac{1} ) where R is the resistor value and C is the capacitor value.

3. Duty Cycle Control:

   • Adjust the duty cycle using an external resistor connected to pin 7.
   • For a 50% duty cycle, connect pin 7 to pin 6 (ground).

4. Output Waveform Selection:

   • Select between sine, square, and triangular wave outputs by connecting pin 2 to either pin 3 or pin 4.
   • Sine wave: connect pin 2 to pin 3.
   • Square wave: connect pin 2 to pin 4.
   • Triangular wave: leave pin 2 unconnected.

5. Temperature Considerations:

   • Ensure the operating environment temperature remains within -40°C to 85°C.
   • Avoid exposing the device to temperatures outside this range to prevent damage.

6. Power Dissipation:

   • Keep the power dissipation below 375 mW to ensure reliable operation.
   • If necessary, use heat sinks or other cooling methods to manage heat.

7. Handling Precautions:

   • Handle with care to avoid electrostatic discharge (ESD).
   • Follow standard ESD protection guidelines when handling and installing the component.

(For reference only)