Details

---

BUY BTA24-600BWRG https://www.utsource.net/itm/p/12542748.html

Parameter	Symbol	Min	Typ	Max	Unit
Rated RMS On-State Current	IT(RMS)	-	24	-	A
Peak On-State Current (10 ms)	I(TM2)	-	185	-	A
Repetitive Peak Off-State Voltage	VDRM	-	600	-	V
Non-Repetitive Peak Off-State Voltage (1.5 ms)	VRRM	-	700	-	V
Gate Trigger Current (Min)	IG(T)	30	-	-	mA
Holding Current (Max)	IH	15	-	-	mA
On-State Voltage Drop at IT(RMS)	VT	-	1.2	-	V
Thermal Resistance, Junction to Case	R胃JC	-	0.8	-	掳C/W
Maximum Junction Temperature	Tj(max)	-	-	125	掳C

Instructions for Use:

1. Mounting:

   • Ensure proper heat sinking to maintain the junction temperature within the specified limits.
   • Use thermal grease or thermal pads between the device and the heat sink to improve thermal conductivity.

2. Gate Triggering:

   • Apply a gate current of at least 30 mA to ensure reliable triggering.
   • The gate pulse should be maintained until the load current exceeds the holding current (15 mA).

3. Overvoltage Protection:

   • Use appropriate overvoltage protection devices (e.g., varistors, snubbers) to protect against transient voltages exceeding the rated off-state voltage.

4. Current Limiting:

   • Ensure that the RMS on-state current does not exceed 24 A to avoid overheating and potential damage to the device.
   • For applications with high peak currents, use external current limiting components to prevent exceeding the peak on-state current (185 A).

5. Storage and Handling:

   • Store the device in a dry, cool place away from direct sunlight and sources of heat.
   • Handle with care to avoid mechanical stress and damage to the leads.

6. Soldering:

   • Preheat the device to reduce thermal shock during soldering.
   • Use a soldering iron with a temperature not exceeding 300掳C and complete the soldering process within 10 seconds.
   • Allow the device to cool naturally after soldering.

7. Testing:

   • Test the device under controlled conditions to ensure it meets the specified parameters.
   • Use a suitable test circuit to verify the on-state and off-state characteristics.

By following these instructions, you can ensure optimal performance and longevity of the BTA24-600BWRG triac.

(For reference only)