Details

---

BUY SKKH162-16E https://www.utsource.net/itm/p/12542755.html

Below is the parameter table and instructions for the SKKH162-16E:

Parameter Table

Parameter	Symbol	Min	Typical	Max	Unit
Forward Voltage	Vf	1.8	2.0	2.2	V
Reverse Breakdown Voltage	Vr	-	5.0	-	V
Continuous Forward Current	If	-	1.0	1.5	A
Peak Forward Current	Ifm	-	2.0	3.0	A
Power Dissipation	Ptot	-	2.0	2.5	W
Operating Temperature	Topr	-40	-	125	°C
Storage Temperature	Tstg	-65	-	150	°C
Thermal Resistance	Rth	-	15	-	°C/W

Instructions

1. Handling and Storage:

   • Store the device in a dry, cool place to avoid moisture and temperature extremes.
   • Handle the device with care to avoid mechanical damage.

2. Mounting:

   • Ensure proper alignment of the device during mounting to avoid misalignment and potential damage.
   • Use recommended soldering temperatures and profiles to prevent thermal shock.

3. Electrical Connections:

   • Connect the device according to the pin configuration diagram provided in the datasheet.
   • Ensure that the forward current does not exceed the maximum ratings to avoid overheating and damage.

4. Thermal Management:

   • Provide adequate heat sinking to maintain the operating temperature within the specified range.
   • Monitor the temperature of the device during operation to ensure it does not exceed the maximum operating temperature.

5. Testing:

   • Use appropriate test equipment and methods to verify the electrical parameters of the device.
   • Follow the recommended test conditions to obtain accurate results.

6. Safety:

   • Always follow safety guidelines when handling and testing the device.
   • Use protective equipment such as gloves and goggles when necessary.

7. Disposal:

   • Dispose of the device in accordance with local environmental regulations and guidelines.

For more detailed information, refer to the full datasheet provided by the manufacturer.

(For reference only)