Details

---

BUY AK4620AVF https://www.utsource.net/itm/p/12542757.html

Parameter	Description	Value
Device Type	High-quality audio codec with stereo ADC and DAC
Supply Voltage (VDD)	Operating voltage range	2.7 V to 3.6 V
Standby Current	Current consumption in standby mode	0.5 μA
Active Current	Current consumption in active mode	10 mA
SNR (Signal-to-Noise Ratio)	SNR for both ADC and DAC channels	95 dB
THD+N (Total Harmonic Distortion + Noise)	THD+N for both ADC and DAC channels at 1 kHz	-85 dB
Sampling Rate	Supported sampling rates	8 kHz to 48 kHz
Interface	Digital audio interface types	I2S, Left-Justified, Right-Justified
Package Type	Package type of the IC	SSOP-28
Operating Temperature	Temperature range for operation	-40°C to 85°C

Instructions:

1. Power Supply: Ensure the supply voltage is within the specified range of 2.7 V to 3.6 V.
2. Initialization: Use the provided register settings or initialization code from the datasheet to configure the device properly.
3. Interface Configuration: Select the appropriate digital audio interface (I2S, Left-Justified, Right-Justified) based on system requirements.
4. Sampling Rate Setting: Configure the desired sampling rate through the control registers.
5. Power Management: Utilize the power-down modes to minimize power consumption when not actively processing audio.
6. Audio Path Setup: Define the audio path configuration (input/output routing) using the internal registers.
7. Handling ESD: Be cautious of electrostatic discharge; follow proper handling procedures to prevent damage.
8. Mounting: Ensure the SSOP-28 package is correctly mounted on the PCB to avoid soldering issues and ensure reliable connections.

(For reference only)