Details

---

BUY 40T65QES https://www.utsource.net/itm/p/12542764.html

Parameter	Symbol	Min	Typ	Max	Unit	Notes
Collector-Emitter Voltage	Vceo	-	-	650	V
Collector-Base Voltage	Vcbo	-	-	700	V
Emitter-Base Voltage	Vebo	-10	-	5	V
Continuous Collector Current	Ic	-	-	40	A
Pulse Collector Current (10ms)	Icm	-	-	80	A
Power Dissipation	Ptot	-	-	200	W
Junction Temperature	Tj	-55	-	150	掳C
Storage Temperature	Tstg	-55	-	150	掳C
Transition Frequency	Ft	-	3	-	MHz

Instructions:

1. Mounting and Handling:

   • Handle with care to avoid mechanical damage.
   • Ensure proper heat sinking for continuous operation at high currents.

2. Electrical Connections:

   • Connect the collector to the positive supply.
   • Connect the emitter to ground or the load.
   • Connect the base to the control circuit.

3. Thermal Management:

   • Use a heatsink to maintain the junction temperature within safe limits.
   • Ensure adequate ventilation if used in enclosed spaces.

4. Overvoltage Protection:

   • Consider using transient voltage suppressors (TVS) to protect against voltage spikes.

5. Current Limiting:

   • Use appropriate current-limiting resistors or circuits to prevent exceeding the maximum collector current.

6. Storage:

   • Store in a dry, cool place away from direct sunlight.
   • Avoid exposure to corrosive environments.

7. Operational Testing:

   • Perform initial testing at low power levels to ensure proper operation.
   • Monitor temperatures and currents during operation to ensure they remain within specified limits.

(For reference only)