Details

---

BUY BCR183 E6327 https://www.utsource.net/itm/p/12542766.html

Parameter	Symbol	Min	Typ	Max	Unit
Collector-Emitter Voltage	VCEO	-	30	-	V
Collector-Base Voltage	VCBO	-	45	-	V
Emitter-Base Voltage	VEBO	-	5	-	V
Continuous Collector Current	IC	-	0.1	-	A
Base-Emitter Saturation Voltage	VBE(sat)	0.6	0.9	1.2	V
Collector-Emitter Saturation Voltage	VCE(sat)	0.1	0.2	0.3	V
DC Current Gain	hFE	100	300	700	-
Storage Temperature Range	TSTG	-55	-	150	°C

Instructions for Using BCR183 E6327

1. Handling Precautions:

   • Avoid exposing the transistor to static electricity.
   • Use appropriate heat sinks if operating at high currents or power levels.

2. Mounting:

   • Ensure proper alignment of the pins during soldering.
   • Soldering temperature should not exceed 260°C for more than 10 seconds.

3. Biasing:

   • Ensure that the base-emitter voltage (V_BE) is within the specified range to avoid damage.
   • Use a current-limiting resistor to prevent excessive base current.

4. Operating Conditions:

   • Do not exceed the maximum ratings listed in the parameter table.
   • Operate within the recommended temperature range to ensure reliable performance.

5. Testing:

   • Use a multimeter to check for continuity and correct polarity before connecting to a circuit.
   • Perform functional tests under controlled conditions to verify performance.

6. Storage:

   • Store in a dry, cool place away from direct sunlight and sources of heat.
   • Keep in anti-static packaging to prevent damage from electrostatic discharge (ESD).

7. Troubleshooting:

   • If the transistor fails, check for overvoltage, overcurrent, or overheating conditions.
   • Verify the integrity of the surrounding circuit components and connections.

(For reference only)