Details

---

BUY FGL40N120ANTU https://www.utsource.net/itm/p/12542779.html

Parameter	Symbol	Min	Typ	Max	Unit
Collector-Emitter Voltage	Vceo	-	-	1200	V
Collector-Base Voltage	Vcbo	-	-	1200	V
Emitter-Base Voltage	Vebo	-	-	7	V
Continuous Collector Current	Ic	-	40	-	A
Continuous Collector-Emitter Saturation Voltage	Vcesat	-	1.8	-	V @ Ic = 30A, Vge = 15V
Gate-Emitter Voltage	Vge(th)	-	4	6	V
Total Power Dissipation	Ptot	-	-	1200	W
Junction Temperature	Tj	-55	-	175	°C
Storage Temperature	Tstg	-55	-	150	°C
Thermal Resistance, Junction to Case	Rth(j-c)	-	-	0.5	K/W

Instructions for Use:

1. Handling Precautions:

   • Handle with care to avoid mechanical damage.
   • Avoid exposure to high temperatures and humidity.
   • Use appropriate ESD (Electrostatic Discharge) protection during handling.

2. Mounting:

   • Ensure proper heat sinking to manage thermal resistance.
   • Tighten screws to the recommended torque values to ensure good thermal contact.
   • Use thermal paste between the device and the heatsink for better heat dissipation.

3. Operational Conditions:

   • Do not exceed the maximum ratings specified in the table.
   • Ensure that the junction temperature remains within the specified range.
   • For reliable operation, keep the gate-emitter voltage within the threshold limits.

4. Testing:

   • Use a suitable power supply and testing equipment to verify the device parameters.
   • Perform tests at room temperature unless otherwise specified.

5. Storage:

   • Store in a dry, cool place away from direct sunlight.
   • Keep in original packaging until ready to use to prevent damage.

6. Soldering:

   • Follow the recommended soldering profile to avoid thermal shock.
   • Use a temperature-controlled soldering iron and flux to ensure a good solder joint.

7. Troubleshooting:

   • If the device fails to operate correctly, check for proper connections and power supply.
   • Verify that the device is not overheating.
   • Refer to the datasheet for detailed troubleshooting steps.

(For reference only)