Details

---

BUY CL-GD5434-J-QC-F https://www.utsource.net/itm/p/12542781.html

Parameter	Value/Description
Part Number	CL-GD5434-J-QC-F
Type	Capacitor
Capacitance	10 μF
Voltage Rating (DC)	50 V
Tolerance	±10%
Operating Temperature	-55°C to +125°C
Case Size	1210 (3216 Metric)
Termination	SMD (Surface Mount Device)
Dielectric Material	X7R
RoHS Compliance	Yes
Lead-Free	Yes
Packaging	Tape and Reel
Manufacturer	[Manufacturer Name]

Instructions:

1. Handling:

   • Handle with care to avoid mechanical damage.
   • Use ESD (Electrostatic Discharge) protection when handling to prevent damage.

2. Mounting:

   • Ensure the soldering iron is clean and free from contaminants.
   • Preheat the PCB (Printed Circuit Board) to reduce thermal shock.
   • Apply a small amount of solder to the pads before placing the capacitor.
   • Place the capacitor on the PCB and reflow solder according to the recommended temperature profile.

3. Soldering Profile:

   • Preheat: 120°C to 150°C for 60 to 90 seconds.
   • Soak: 180°C to 200°C for 60 to 90 seconds.
   • Reflow: 230°C to 250°C for 10 to 20 seconds.
   • Cooling: Cool down to room temperature at a rate of 3°C to 5°C per second.

4. Storage:

   • Store in a dry, cool place away from direct sunlight.
   • Keep the components in their original packaging until ready for use.

5. Inspection:

   • Visually inspect the solder joints for proper wetting and absence of bridges or voids.
   • Use a multimeter to check for continuity and ensure the capacitor is not shorted.

6. Testing:

   • After assembly, perform electrical tests to verify the capacitance and voltage rating.
   • Use a capacitance meter to measure the actual capacitance value.

7. Disposal:

   • Dispose of any defective or unused components in accordance with local regulations and environmental guidelines.

(For reference only)